High Temperature Air Cooling Air Dryer

Description
As kind of compressed air dryer, high inlet temperature air cooling air dryer consists of air heat exchanger, evaporator, outer rotor cooling fan, compressor and cooling system, etc. Air heat exchanger adopts inside and outside wall corrugated pipes so as to increase the utilization of cooling capacity. Besides, it features reverse-flow structure. Evaporator employs turbulent flow structure with high heat exchange efficiency. Outer rotor cooling fan features large blast capacity, low noise and frequent start-stop with long operating life. The level of protection for this compressed air dryer is IP54 (dustproof and splash proof).

Features
1. This high inlet temperature air cooling air dryer has the feature of complete air-liquid separation. It utilizes filter type air-liquid separator (installed with US HANKISON filter element), avoiding second water evaporation and guaranteeing the drying effect. Its drying efficiency is as high as 99.99%.
2. This compressed air dryer employs inner zinc plated copper pipe with working pressure ranging from 0.3 to 4.5 MPa.
3. It selects stainless steel pipes applicable in medical and food industries. Such material makes this compressed air dryer acid-resisting, alkali-resisting and corrosion-resisting.
4. This high inlet temperature air cooling air dryer is installed with water condenser which features slow flow, multi-stroke, high heat exchange efficiency and long time operation without scaling.

Technical Data of Such Compressed Air Dryer
Air Inlet Temperature: Normal Temperature ≤45℃ High Temperature ≤80℃
Cooling Method: Air-Cooling
Inlet Pressure: 0.4-1.0 Mpa
Pressure Loss: ≤ 0.03 MPa
Pressure Dew Point: 2 to 10℃
Refrigerant: R22

Types of Such Compressed Air Dryer

Model		SAD-1HTF	SAD-2HTF	SAD-3HTF	SAD-6HTF	SAD-10HTF	SAD-13HTF	SAD-15HTF	SAD-20HTF	SAD-30HTF
Capacity(Nm3/min)		1.2	2.4	3.8	6.5	10.7	13.5	17	23	33
Power Source (V/Hz)		220/50	220/50	220/50	220/50	380/50	380/50	380/50	380/50	380/50
Compressor Power (HP/Kw)		1/0.85	1/0.85	1.25/1.25	1.5/1.5	3/2.5	3/2.5	3.6/3	5/4	7.5/6.5
Fan Power (W)		90	90	120	120	2x120	2x120	2x120	2x160	4x180
Air Joint Pipe Caliber		ZG1	ZG1	ZG1.5	ZG2	ZG2	DN65	DN65	DN80	DN100
Weight (kg)		50	90	110	200	260	280	330	450	780
Overal  Dimension	L (mm)	450	450	500	560	670	670	670	1450	1650
	W (mm)	630	700	850	900	1180	1180	1180	750	930
	H (mm)	600	850	900	1000	950	950	950	1010	1580

1. Air Heat Exchanger
2. Evaporimeter
3. Gas-Liquid Separator
4. Drainage Anti-Blocking Filter
5. Manual Blow-Down Valve
6. Refrigeration Compressor
7. Suction Filter
8. Vaporizer
9. Liquid Separator
10. Air-Liquid Mixer
11. Thermal Expansion Valve
12. Sight Glass
13. Dry Filter
14. Reservoir
15. Hot Air Bypass Valve
16. Water Regulating Valve
17. Water Filter
18. Condenser (Air Cooling)
19. Condenser (Water Cooling)
20. Front Pre-Cooler (Water Cooling)
21. Front Pre-Cooler (Air Cooling)
22. Auto-Drainer